LCD Graphic Smart Display
LCD Graphic Smart Display 128x64, Display LCD 128x64
Model No. ADM12864B
►Graphic LCD 128x64, Display LCD 128x64
►Monochrome Graphic LCD
►Built-in controller KS0108B
►+5V power supply
►1/64 duty cycle
Descrpition of LCD Graphic Smart Display ADM12864B
LCD Graphic Smart Display ADM12864B can be used on electrical home appliances, consumer electronics including white goods, POS system, home applications and industrial instrument ect.We have a full range of LCD Graphic Smart Displays whose resolutions ranging from 100 x 32 to 320 x 240.
• Display format: 128*64 dots matrix graphic
• Easy interface with 8-bit MPU
• Low power consumption
• LED back-light
• Driving method : 1/64 duty , 1/6.7 bias
• LCD driver IC: KS0108B(2PCS)、KS0107B
• Connector: Zebra
Item Dimension Unit
Number of Dots128.0*64.0PCS
Module Size With B/L78.0*70.0*15.0mm
Parameter Symbol Rating Unit
Operating temperatureTopr0 ~ +50℃
Storage temperatureTstg-20 ~ +70℃
Figure 1. External Dimensions
*NOTE: 1.All units are mm.
2.Tolerances unless otherwise specified ±0.2.
Interface Pin Connections
Pin No. Symbol I/O Type Description
When CS1=L,CS2=H, select IC1
When CS1=H,CS2=L, select IC2
5V0SupplyLCD driver supply voltage
Data input/output pin of internal shift register
MS SHL DIO1 DIO2
H H Output Output
H L Output Output
L H Input Output
L L Output Input
Read or Write
H Data appears at DB[7:0] and can be read by the CPU while
E= H CS1B=L,CS2B=L and CS3=H.
L Display data DB[7:0] can be written at falling edge of E
when CS1B=L, CS2B=L and CS3=H.
H Read data in DB[7:0] appears while E= “High”.
L Display data DB[7:0] is latched at falling edge of E.
9DB0I/OData bus [0~7]
Bi-directional data bus
【1】ON/OFF register becomes set by 0.(display off)
【2】display start line register becomes set by 0 (Z-address 0 set, display from line 0)
【3】After releasing reset , this condition can be changed only by instruction.
18VEEPowerVEE is connected by the same voltage.
Electrical Absolute Maximum Ratings (KS0107B)
Parameter Symbol Rating Unit Note
Operating voltageVDD-0.3 ~ +7.0V*1
Supply voltageVEEVDD-19.0 ~ VDD+0.3V*4
Driver supply voltageVB-0.3 ~ VDD+0.3V*1,2
VLCDVEE-0.3 ~ VDD+0.3V*3,4
• Based on VSS = 0V
• Applies to input terminals and I/O terminals at high impedance. (Except V0L, V1L, V4L, and V5L)
• Applies to V0L, V1L, V4L, and V5L.
• Voltage level: VDD≥V0≥V1≥V2≥V3≥V4≥V5≥VEE
1.What is the lead time for MP ?
Answer: Normally it takes 4 weeks.
2.Where is your factoru located ?
Answer: Our factory is located in Xiamen ,which is a beautiful coastal city.
3.What is your company phone number ?
It’s 0086-592-5716899 or cell phone 0086-18950056029.
4.How can I get the price and consult for product details?
Answer:Please send us inquiry through email email@example.com or Lee@amotec-display.com.Graphic LCD Module China